Brand Name : JinDingEn
Model Number : DLB-2400×10000
Certification : CE/ISO:9001/BV
Place of Origin : China
MOQ : 1 set
Payment Terms : L/C, T/T
Supply Ability : 100 Sets per month
Delivery Time : 20 days after receive deposit
Packaging Details : Fumigation-free wooden case and packaging fumigation proved board for export transportation.
Nominal total pressure : 90000KN
Plate size : 2400×10000 mm
Dimensions : 1000×340×460 mm
Plunger diameter : Φ630
Control method : PLC
Unit pressure of hot plate : 3.75
Silicone Forming Machine For Sealing Rings
Specific features
Double station design: independent oil circuit, double oil pumps and double motors are required. Vacuum extraction device to extract the air from the mould cavity to avoid air entrapment, shorten the injection time, shorten the moulding cycle and improve product quality. Suitable for rubber parts with complex structure and difficult exhaust.
Mould opening design: new patented guide rail. Special design can be opened at 90 degrees angle, easy to operate.
Mould handling design: special design is incorporated in the mould handling mechanism. It is durable and quiet. Fast and obsolete.
Hydraulic system design: the system uses a high pressure pump and a low pressure pump, which can close two presses at the same time. The system is low noise, stable and has a long life.
Alignment: two different die calibration speeds are offered: fast and slow, which the user can choose to use according to the actual situation. It makes the calibration safer and more accurate.
Technical Parameters of Frame type Plate Vulcanizing Machine:
Type |
XLB-DQ 900×900×4 |
XLB-DQ 1200×1200×4 |
XLB-DQ 1400×1500×4 |
Total Pressure(MN) | 3.15 | 5.00 | 8.00 |
Plate size(mm) | 900×900 | 1200×1200 | 1400×1500 |
Plate clearance(mm) | 150 | 150 | 180 |
Working stroke | 600 | 600 | 720 |
Plate pressure (kg/cm²) |
39 | 35 | 38 |
The working fluid pressure(Mpa) | 16 | 18 | 16 |
Number of cylinders (sleeve) |
1 | 1 | 1 |
Plunger diameter(mm) | Φ500 | Φ600 | Φ800 |
Main motor pouer (KW) | 4+5.5 | 4+5.5+5.5 | 5.5+7.5+7.5 |
Weight(kg) | 15000 | 22000 | 38000 |
Machine movement flow
1. Set up the mould (initial state)
2. Supply the material and start the process (close the mould)
3. Load the mould
4. Main plunger rises to predetermined position ready for vacuum
5. Lower the vacuum mask. At the same time, suck out the air until a vacuum is reached.
6. The main ram rises. Increase pressure to expel air bubbles.
7 ,After the vacuum state is further present, lift the vacuum mask and cure.
8. After curing, lower the main ram.
9. Remove the mould and open it.
10. Remove the finished product and put in new material.
Main Features
1. The machine adopts the semiautomatic control. Worker can set the vulcanzing time , vulcanizing
temperature in the cabinet . On finishing vulcanization , machine will alarm and worker can open mold
2. Most spare parts for hydraulic system are from our best domestic brand
3. Machine body casting is made of FCD 50 ductile cast iron ,which is processed by high tensile strength after aging passivation
4. The machine pillars/ columns are made of medium carbon steel , and its hardness can reach HRC55-58
5. The cartridge heater adopts three stages winding, nichrome wire , non-rusty
6. Oil seal are from Japanese NOK and Sakagmi Brand , it is wear-resisitant ,durable and oil tight
7. Main electrical elements are from Schneider France ,which can stabilize machine performance
3.15KN 900×900MM Silicone Rubber Forming Machine For Sealing Rings Images |
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们